Sunday, 27 November 2016

High Range Soundless Non-Explosive Expansive Mortar Cracking Agent-ACCONEX - 7676001100 / 8884445310
What is Non-explosive demolition / cracking agent (Brand: ACONEX)
Non-explosive demolition / cracking agent is a soundless and safe demolition agent which is quite different from ordinary demolition agents such as explosives and dangerous materials. It does not cause any fly rock, noise, ground vibration, gas, dust or any other environmental pollution when used properly. 
As requirements for demolishing rock and reinforced concrete in construction increase in tight quarters, the use of explosives and explosive agents is becoming more restricted as far as safety and environmental pollution problems are concerned. Non-explosive demolition / cracking agent is the solution. 

Non-explosive demolition / cracking agent is a powder with amazing 18,000 PSI expansive strength when mixed with common water. Poured into holes, Non-explosive demolition / cracking agent breaks reinforced concrete & rock safely and quietly, while providing SILENT cracking. 

Since Non-explosive demolition / cracking agent provides controlled demolition according to drilling patterns, it is very easy to break reinforced concrete and all kinds of stone into desired sizes and shapes, without noise, vibration or dust. 

Reinforced Concrete Demolition & Cutting 
In demolition, concrete cutting & excavating industry, Non-explosive demolition / cracking agent helps you to break reinforced concrete and rock into chunks, so you may easily cut off re bar  haul it away with a crane or truck without damage remaining part. 

Rock Breaking & Excavation 
In mining and quarrying industry, Non-explosive demolition / cracking agent helps to achieve perfect slabs and blocks from limestone, onyx, marble, granite or any other type of stone you are working with. Compares to blasting, Non-explosive demolition / cracking agent avoids waste of valuable stone, high insurance, costly storage and labor. 

Stone Quarrying & Dimension 
Non-explosive demolition / cracking agent can also be applied along with traditional methods like primer cord, hydraulic breaker, diamond blade saw and jackhammer to help cut cost, work time and increase safety, Plus its silent operation, Non-explosive demolition / cracking agent is perfect for residential, school, hospital and airport area. 
Alternative to Blasting, Breaker, Jackhammer, Diamond Saw… 

Non-explosive demolition / cracking agent helps your work to become more efficient and cost effective. 

Highlights 
Amazing 18,000 PSI expansive strength when mixed with common water. 
Easy to use, just mix with water, pour into holes, then it expands. 
Cracks reinforced concrete, limestone, flagstone, granite, marble and onyx safely and quietly. 
An alternative to blasting, diamond sawing and jack hammering, which is safer, more efficient, works without noise, vibration, dust by providing silent expansive cracking. 
No special permit, insurance, training or equipment needed. 


Advantages:
1. Controlled Demolition
2. Dust-free
3. Vibration Free
4.No License Required
5.No Flying Debris
6. Environmental Friendly
7. Silent Operation
8. Rapid Usability
9. Economy
10. Safety for Vicinity 

12 comments:

  1. It was a great article! Thanks for such a nice blog.
    Expansive mortar chemical that cracks rocks and concrete. It is a concrete cutting, granite breaking and general demolition solution.
    Non Explosive Cracking Agent


    ReplyDelete
  2. Great Post.....Really loved the blog and thanks for your efforts for writing and sharing the blog..Expando is ideal for DIY home renovators needing a quiet, non-explosive demolition solution
    Non Explosive Cracking Agent

    ReplyDelete
  3. Really good post on non explosive rock breaking. We also take the leverage of introducing EXPANDO. Visit us..
    Rock & Concrete Breaking

    ReplyDelete
  4. This comment has been removed by the author.

    ReplyDelete
  5. The future of rock breaking or concrete demolition lies in the hand of non explosive agents only. This has been long overdue actually. The conventional methods of demolitions were very hazardous. No doubt, the rock breaking projects will become much safer now.
    Royex Rock breaking technology

    ReplyDelete
  6. Can u pls share u r number

    ReplyDelete
  7. Nice technical information, further would like to know the time required for cracking / demolition once chemical poured in hole .

    ReplyDelete
  8. please give the contract no

    ReplyDelete
  9. i am searching phone no for purchase materials

    ReplyDelete
  10. What is the theoretical consumption of aconex for breaking 1 cubic meter of hard rock?

    ReplyDelete
  11. What is the consumption of aconex to break 10 cum hard rock UCS value 70 Mpa. The Rock is of depth 2m. what is cost also to crack the same rock.
    pls post to my email id usukritk@yahoo.com

    ReplyDelete